Ao Smith Water Heater Pilot Light Won't Light - mautic

There is no light on the water heater.

But if that heater was kicking off from the thermal switch, that would need to be reset manually.

The igniter is working as we see the initial spark but then it dies down when we click the.

I have an ao smith water heater and the pilot suddenly won't stay lit.

If you really want to keep the water heater going, consider replacing the.

I timed it and there.

The status red light stopped blinking and the water heater quit heating water.

After my vacation, the pilot light went out.

Pilot light is lit but burner does not light.

There is residual gas inside the unit.

After my vacation, the pilot light went out.

Pilot light is lit but burner does not light.

There is residual gas inside the unit.

It's the piece of metal coming out of the white insulator.

I tried lighting in following the directions on the water heater and it will not light.

Nevermind that the click starter does not work, but to get around that, i manually lit the pilot, and everything was fine, but.

I had a handyman come in and change the thermocouple on the water heater too, it still wont light.

I have replaced the thermocouple and cleaned the flame arrestor, but the.

Let an ao smith rep repair it.

There used to be a problem with it where the pilot wouldn't stay lit for more than 15 minutes after i would light it and turn the heater on.

After peeking through the little window, i see the pilot is lighting, but once i remove my finger.

It looks atrocious and it should be shined up!

Nevermind that the click starter does not work, but to get around that, i manually lit the pilot, and everything was fine, but.

I had a handyman come in and change the thermocouple on the water heater too, it still wont light.

I have replaced the thermocouple and cleaned the flame arrestor, but the.

Let an ao smith rep repair it.

There used to be a problem with it where the pilot wouldn't stay lit for more than 15 minutes after i would light it and turn the heater on.

After peeking through the little window, i see the pilot is lighting, but once i remove my finger.

It looks atrocious and it should be shined up!

I have a 2 years old a o smith gnr 50 200 water heater.

Smith water heater won't stay on.

Ao smith water gas water heater:

I have an a. o. smith model gcv 50 100, 50 gallon natural gas water heater that will not stay lit and the pilot goes out.

I can hold the button down for a.

I don't have any difficulty getting the pilot light lit as some other users have indicated.

You would only be charged labor.

So i attempted to light the pilot doing the following:

With this in mind, here are the most common reasons that a pilot won't light or won't stay lit and what you can do about them.

📸 Image Gallery

There used to be a problem with it where the pilot wouldn't stay lit for more than 15 minutes after i would light it and turn the heater on.

After peeking through the little window, i see the pilot is lighting, but once i remove my finger.

It looks atrocious and it should be shined up!

I have a 2 years old a o smith gnr 50 200 water heater.

Smith water heater won't stay on.

Ao smith water gas water heater:

I have an a. o. smith model gcv 50 100, 50 gallon natural gas water heater that will not stay lit and the pilot goes out.

I can hold the button down for a.

I don't have any difficulty getting the pilot light lit as some other users have indicated.

You would only be charged labor.

So i attempted to light the pilot doing the following:

With this in mind, here are the most common reasons that a pilot won't light or won't stay lit and what you can do about them.

Turned the control knob to pilot and pressed.

I have taken very good care of them, i flush them once a year, change the anode rods as needed, keep them.

Smith water heater won't stay on.

Ao smith water gas water heater:

I have an a. o. smith model gcv 50 100, 50 gallon natural gas water heater that will not stay lit and the pilot goes out.

I can hold the button down for a.

I don't have any difficulty getting the pilot light lit as some other users have indicated.

You would only be charged labor.

So i attempted to light the pilot doing the following:

With this in mind, here are the most common reasons that a pilot won't light or won't stay lit and what you can do about them.

Turned the control knob to pilot and pressed.

I have taken very good care of them, i flush them once a year, change the anode rods as needed, keep them.

You would only be charged labor.

So i attempted to light the pilot doing the following:

With this in mind, here are the most common reasons that a pilot won't light or won't stay lit and what you can do about them.

Turned the control knob to pilot and pressed.

I have taken very good care of them, i flush them once a year, change the anode rods as needed, keep them.